DataBar Omnidirectional AIM ID
Product Reference Guide
This feature enables/disables transmission of the DataBar Omnidirec-
tional AIM symbology identifier.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan your selection from the barcodes below. You'll need to cover
any unused barcodes on this and the facing page to ensure that
the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
DATABAR OMNIDIRECTIONAL AIM ID = DISABLE
DATABAR OMNIDIRECTIONAL AIM ID = ENABLE
7-193