DataBar Expanded EAN-128 Emulation
7-196
Enables/disables EAN 128 emulation for DataBar Expanded.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
DATABAR EXPANDED/EAN-128 EMULATION = DISABLE
DATABAR EXPANDED/EAN-128 EMULATION = ENABLE
TM
Magellan
8500Xt Scanner