Codabar Enable - Datalogic Magellan 8500Xt Product Reference Manual

Codabar Enable

Product Reference Guide
Enables/disables the ability of the scanner to decode Codabar labels.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
CODABAR = DISABLE
CODABAR = ENABLE
7-239