Upc-E Number System Character Transmission - Datalogic Magellan 8500Xt Product Reference Manual

UPC-E Number System Character Transmission

This item is ignored when the advanced feature, Full Label Edit, is enabled.
NOTE
Product Reference Guide
Enables/disables transmission of a UPC-E number system character.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
UPC-E NUMBER SYSTEM CHARACTER TRANSMISSION = DISABLE
UPC-E NUMBER SYSTEM CHARACTER TRANSMISSION = ENABLE
7-145