Adjustment Program; Outline; Starting Up The Adjustment Program - Epson STYLUS PHOTO 925 Service Manual

EPSON Stylus Photo 925

5.3 Adjustment Program

The service program operates on Windows programs on the Windows 98 platforms.
T
This program is specially designed for use on the Windows 98
C A U T I O N
platforms. It will not run on DOS, Windows 3.x, or XP.
T
This program runs only on USB I/F.

5.3.1 Outline

This program is executes individually for each item to be adjusted. It includes the
following adjustment and maintenance items.
Table 5-2. Adjustment Program
No. Main Menu Service
1 Adjustment EEPROM initialization
Head ID
CR Motor drive dispersion
Bi-D adjustment
USB ID input
First dot position adjustment
Cut position adjustment
Memory card drive check
2 Maintenance Head cleaning
items
Initial ink charge
Refurbishment for DOA
Protection counter check/reset
The number of the cutting operation
EEPROM backup data
3 Check pattern A4 normal paper printing
printing
4 Appendix EEPROM data
Adjustment

5.3.2 Starting up the adjustment program

1.
Paper to be used See
None p.123
A4 normal paper p.124
None p.125
2.
A4 normal paper p.126
3.
None p.128
A4 plain paper p.129
4.
A4 normal paper p.129
None p.130
None p.131
None p.131
None p.132
None p.133
None p.133
None p.134
A4 normal paper p.135
None p.136
Adjustment Program
The following screen will be displayed when the service program is started up.
Figure 5-3. Program initial screen
Select the model name.
Select the number of the port to which the Stylus Photo 925 is connected to the
computer.
Click on the [OK] button. Main menu will be displayed.
Revision A
122