EPSON Stylus Photo 925
Figure 5-4. Main Menu
T
Do not start up the adjustment program before connecting the
C A U T I O N
USB cable to the printer.
T
Be sure to restart the adjustment program if the printer power is
turned off or the USB cable is disconnected during the
adjustment program execution.
This adjustment program includes the following buttons.
V
End
Click on the [Quit] button to display the menu shown below. Adjustments will be
completed and the program ended when the [Quit] button is clicked. The screen
will return to the model selection screen when the [Next] button is clicked.
Figure 5-5. Termination
Adjustment
5.3.3 EEPROM initialization
It is required to write the initial setting values into EEPROM when the Main Board is
replaced.
Click the [OK] button, and the intended market will be written in EEPROM.
Figure 5-7. Intended Market Setting Completion Screen
Adjustment Program
Figure 5-6. EEPROM initialization
Revision A
123