Warning; Warning Display At Initial Ink Charge; Button Functions; Power Button - Epson STYLUS PHOTO 925 Service Manual

EPSON Stylus Photo 925
Table 1-5. Error (continued)
Source Error
Color ink cartridge not correctly
installed.
Color:T027
The genuine EPSON ink cartridge
listed above is recommended.
Black ink cartridge not correctly
installed.
Ink cartridge out or
Black:T026
Wrong ink
The genuine EPSON ink cartridge
cartridge
listed above is recommended.
Black and color ink cartridges not
correctly installed.
Black:T026
Printer
Color:T027
These genuine EPSON ink cartridges
listed above are recommended.
Service required. Parts inside your
Maintenance printer are at the end of their service
request life. Contact your dealer for
replacement.
Cutter error. Turn the printer off, and
Cutter error
remove any jammed paper. Wait a few
(position)
minutes, then turn the printer back on.
Unable to cut. Turn the printer off, and
Cutter error (jam) remove any jammed paper. Wait a few
minutes, then turn the printer back on.
Memory card error The inserted card cannot be used with
(Compatible error) this printer.
Memory card error
Card reader
(SmartMedia is
SmartMedia card inserted incorrectly.
inserted upside
down)
General error. Turn the printer off.
Remove any foreign objects from inside
the printer. Wait a few minutes, then
turn the printer back on. If the problem
General Fatal error
persists, contact your dealer.
System error. Press and hold the Power
button for 5 seconds to turn off the
printer.
PRODUCT DESCRIPTION
Display Other
Depends on the
result of the
cartridge
detection
-
-
-
-
-
-
Internal
transaction
error
Control Panel

1.6.4.2 Warning

Table 1-6. Warning
Source Error
Printer Ink low Ink icon blinks
Printing from Communicating with
*1
computer computer. Please wait.
Card reader
Irregular external Connected device cannot be
*2
device used.
*1 This warning appears when Print button is pressed and disappears 3 seconds later.
*2 The warning is displayed for one second at 3-second intervals.

1.6.4.3 Warning Display at Initial Ink Charge

At initial ink change, a warning display is displayed to prompt user operation. Press the
maintenance button to execute initial ink charge.

1.6.5 Button Functions

1.6.5.1 Power Button

• Press this button to turn on/off the power to the printer.
• To turn off the printer power, press and hold the Power button for two seconds or
more.
• If you press and hold the button for five seconds or more, the printer power turns
back on.
Revision A
Display Other
-
Printing from computer,
or performing a utility
like nozzle-check.
When a device that is not
compatible with Mass
Storage Class
specification was
connected to a printer.
22