EPSON Stylus Photo 925
5.3.4 Head ID
This adjustment writes the ID numbers for the Print Head into the EEPROM, and
enables the current settings to be confirmed.
1.
Click on the item to be adjusted, and then click on the [OK] button.
Figure 5-8. Head ID adjustment items
2.
Check the 13-character ID written on each of the print heads, and enter the ID for the
head that has been replaced. Click on the [OK] button when the ID has been entered.
Adjustment
3.
Select "Head ID Check pattern printing", make the printer print the Check Pattern on
A4 normal paper and check the printing result.
Adjustment Program
Figure 5-9. Input head ID
Figure 5-10. Head ID Check Pattern
Revision A
124