Download Print this page

Advertisement

ESC/VP21 Command User's Guide for Business Projectors
ESC/VP21 Command User's Guide for
Business Projectors

Advertisement

   Also See for Epson ESC/VP21

   Related Manuals for Epson ESC/VP21

   Summary of Contents for Epson ESC/VP21

  • Page 1

    ESC/VP21 Command User’s Guide for Business Projectors ESC/VP21 Command User’s Guide for Business Projectors...

  • Page 2: Table Of Contents

    Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchase of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON...

  • Page 3: Introduction To Esc/vp21

    1. Introduction to ESC/VP21 ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper terminal.

  • Page 4: Esc/vp21 Command Formats

    ESC/VP21 Command User’s Guide for Business Projectors 2. ESC/VP21 Command Formats 2.1. Set command format A set command consists of a command and a parameter. Projector returns a colon after executing the command. There are two types of parameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or INIT.

  • Page 5: Projector State And Commands

    ESC/VP21 Command User’s Guide for Business Projectors 455Wi/465i/465T, 93/95/96W/900/910W/905/915W/925 4. Projector state and commands 4.1. Standby state (Operation indicator is in orange) When a projector is in a standby state, executable commands depends on projector models and standby configuration (network network Models Configuration...

  • Page 6: Command Transmission Timing

    ESC/VP21 Command User’s Guide for Business Projectors 5. Command transmission timing 5.1. Standby state 1). For all mode with the standby configuration of “network on” The first command can be sent anytime and the subsequent commands should be sent after receiving a colon from the projector.

  • Page 7

    ESC/VP21 Command User’s Guide for Business Projectors Command Models Execution time PWR ON Others 40seconds 830/835(note5) 20seconds 7900/7950/740/745 61/81/821/S3/S4 25seconds PWR OFF (note4) 600/800/810/811/820 130seconds Others 50seconds 740745, 732/737, 821 20seconds S3/S4, 765/760/755/750, 830/835 10seconds 82, 6100, 1715/1710/1705/1700, 1815/1810/1825, X5/822/823, 400W/410W, G5350/G5100/G5200W S6/X6/W6,1735W/1730W/1725/1720, 84/85/824/825/826W, and later model...

  • Page 8: Error Status

    ESC/VP21 Command User’s Guide for Business Projectors 6. Error Status A projector returns the error status when a projector receives "ERR?" command. The following projectors can return the error status while the projectors become the error status after cooling down. EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/ EB-G5000/G5100/G5150/G5200W/G5300/G5350 And later models.

  • Page 9: Command List And Applicable Models

    ESC/VP21 Command User’s Guide for Business Projectors 7. Command list and applicable models 7.1. Command table 1 (Fixed parameter) (O:Supported -:Not supported) 720/ 8300/ 7800/ 830/ 600/800/ 730/ 8350/ 7850/ 810/811/ Function Command 520/ 9300 7900/ 7950 Power Input source SOURCE PinP setting PINP...

  • Page 10

    ESC/VP21 Command User’s Guide for Business Projectors G5350 S6/S62 1735W/ 84/85/ Z8000WU S7/X7/ X8/ W8 1910/ G5300 1730W/ 824/825 Z8050W 1915/ G5200W 1725/ 826W 1920W/ Function Command G5150 1720 1925W G5100 G5000 Power Input source SOURCE PinP setting PINP A/V Mute Screen MSEL AUTOKEYSTONE Auto Keystone...

  • Page 11

    ESC/VP21 Command User’s Guide for Business Projectors 7.2. Command table 2 (Step parameter) 720/ 8300/ 7800/ 830/ 600/800/ 730/ 8350/ 7850/ 810/811/ Function Command 520/ 9300 7900/ 7950 Adjust the volume Adjust the treble setting TONEH (Adjust the tone setting) Adjust the bass setting TONEL Set brightness...

  • Page 12

    ESC/VP21 Command User’s Guide for Business Projectors 825H/HV, S9/X9/W9 1760W G5950 826WH/WHV, S92/X92 1770W G5900 85+, 825+, 1775W G5800 824H 1750 G5650W Function Command 84H/He/L 910W 1750G G5600 G5500 915W G5750WU G5450WU Adjust the volume 5800/5500 Adjust the treble setting TONEH (Adjust the tone setting) Adjust the bass setting...

  • Page 13: Command Details

    ESC/VP21 Command User’s Guide for Business Projectors 8. Command Details 8.1. Command table 1 (Fixed parameter) Parameter for set Set commands Get commands Models Function (Return code for get) PWR xx All models Power ON/OFF PWR? 00: “Standby” as the time Return the “Standby”...

  • Page 14

    ESC/VP21 Command User’s Guide for Business Projectors 05: Abnormal standby After the fixed time 6100/6000, 1715/1710/1705/1700 passes, an abnormal 1815/1810/1825, X5/822/823 standby is returned G5350/G5300/G5150/G5100/G5000/G5200W after this machine is S6/S62/X6/W6, 1735W/1730W/1725/1720 abnormally generated. 84/85/824/826W Z8000WU/ Z8050W, S7/X7/W7/S8/X8/W8 1900/1910/1915/1920W/1925W/1830 440W/450W/460, 84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+, 825+,826W+ S10/X10/W10, S9/X9/W9/S92/X92...

  • Page 15

    ESC/VP21 Command User’s Guide for Business Projectors G5500/G5750WU/G5450WU,455 Wi/465i/465T, 93/95/96W/900/910W/905/915W/9 AUTOKEYSTONE AUTOKEYSTONE? ON: Auto keystone ON 73/53/74/54, 735 Set auto keystone on OFF: Auto keystone OFF 7800/7850, 61/81, 830/835 or off 740/745/732/737, 821/828 7900/7950, 760/765, 755/750, 62/82, 1715/1710/1705/1700 1815/1810/1825 X5/822/83/83+/822+, 280, X6/W6 1735W1730W1725/1720 84/85/824/825/826W, X8/W8, 1915/1925W/1910W/1920W/1830...

  • Page 16

    ESC/VP21 Command User’s Guide for Business Projectors 460/460T/460i/460e 1750 S9/S10/X9/S92/X92 455Wi/465i/465T 00: Normal G5100/G5300/ G5350 G5500/G5600/G5800/G5900/ 10: 4:3 20: 16:9 G5950 30: Auto 60: Real 1915 00: Normal X8/X10 10: 4:3 20: 16:9 93/95/900/905/925 30: Auto CMODE xx CMODE? 01: sRGB 30/52, 73/53, 720/730/520 Set color mode 02: Normal...

  • Page 17

    ESC/VP21 Command User’s Guide for Business Projectors Parameter for set Set commands Get commands Models Function (Return code of get) CMODE xx CMODE? 01: sRGB 1735W/1730W/1725/1720 Set color mode 03: Presentation2 04: Presentation 05: Theatre 06: Dynamic 08: Sports 10: Custom 11: Black Board 14: Photo 01: sRGB...

  • Page 18

    ESC/VP21 Command User’s Guide for Business Projectors Parameter for set Set commands Get commands Models Function (Return code of get) LAMP? 0 ~ 65535 All models Return the lamp hour Z8000WU/Z8050W: *Z8000WU/Z8050W 0~65535_065535(*) have 2 lamps. LUMINANCE xx LUMINANCE? 00: High 73/53/74/54, 7800/7850 Ste brightness level 01: Low...

  • Page 19

    ESC/VP21 Command User’s Guide for Business Projectors 23: TEXT3 24: TEXT4 00: OFF 83/822/83+/822+ 11: CC1 400W/410W 12: CC2 G5350/G5300/G5150/G5100/ G5000/G5200W 84/85/824/825/826W Z8000WU/Z8050W S7/X7/W7 1830/1900/1910/1915/ 1920W/1925W 84H/He/L, 85H/HV,824H, 825H/HV, 826WH/WHV, 84+, 85+, 825+,826W+ S9/X9/W9/S92/X92 G5950/G5900/G5800/G5650W/ G5600/G5500/G5750WU/G5450WU 1760W/1770W.1775W/1750/1750G 93/95/96W/900/910W/905/915W/925 FLWARNING xx FLWARNING? 00: ON 6100/6110...

  • Page 20

    ESC/VP21 Command User’s Guide for Business Projectors HLENS MIN: Adjusts it to left side continuously. Z8000WU/Z8050W Horizontal lens shift is MAX: Adjusts it to right side continuously adjusted. INC: Adjusts it to right side by one step. DEC: Adjusts it to left side by one step OFF: continuous adjustment...

  • Page 21

    ESC/VP21 Command User’s Guide for Business Projectors S10/X10/W10, S9/X9/W9/S92/X92 G5950/G5900/G5800/G5650W/ G5600/G5500/G5750WU/G5450WU 1760W/1770W.1775W/1750/1750G 93/95/96W/900/910W/905/915W/925 -20 ~ 20 S1/S1H -12 ~ 12 740/745/732/737/760/765/755/750 S3, 82 CONTRAST xx -32 ~ 32 520/720/730/735, 61/81, 821 Set contrast level 30/52, 73/53/74/54 740/745/732/737/760/765/755/750 -30 ~ 30 600/800/910/811/820 8300/8350/9300, 830/835 7800/7850/7900/7950...

  • Page 22

    ESC/VP21 Command User’s Guide for Business Projectors VKEYSTONE xx -90 ~ 90 1815/1810/1825 Set vertical keystone value 1760W/1770W.1775W/1750/1750G -80 ~ 80 G5350/G5300/G5150/G5100/G5200W G5950/G5900/G5800/G5650W/ G5600/G5500 -64 ~ 64 8300/8350/9300, 830/835 7800/7850/7900/7950 -60 ~ 60 S3/S4, 82, 6100, X5/822/823 1715/1710/1705/1710 1735W/1730W/725/1720 S6/X6/W6, 84/85/824/825/826W Z8000WU/Z8050W S7/X7/W7, S8/X8/W8 1910/1915/1920W/1925W...

  • Page 23: Appendix

    ESC/VP21 Command User’s Guide for Business Projectors 9. Appendix 9.1. Communication specification A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending commands to the projector. Serial connection (600/800/810/811/820, 30/52, 73/53/74/54, 8300/9300, 7800/7850, S1/S1H, 61/81, 830/835/821, 828/7900/7950, 62/82,6100/6000, 1815/1810/1825, 83/822/83+/822+, 260/280, 6110/6010, 400W/410W, G5350/G5300/G5200W/G5150/G5100/G5000, 84/85/824/825/826W, Z800WU/Z8050W, 1830/1900/1910/1915/ 1920W/1925W, 440W/450W/450We/450Wi/460/460e/460i, 84H/84He/84L/85H/85HV/824H/825H/825HV/...

  • Page 24

    1760W/EB-1770W/1775W/750 select Wireless Mouse and select Link 21L at Extended Setting of the Menu. ・ EPSON USB COM Driver has to be installed in your computer to use USB for communication. A COM port is added to your computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT) in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).

  • Page 25: Revision History

    ESC/VP21 Command User’s Guide for Business Projectors 10. Revision History Revision Issued date Page Description Sep 16, 2005 All pages First release. Oct 19, 2005 All pages Correction of disclaimer. Model EMP-755/750 addition Nov 4, 2005 All pages Model EMP-62/82/X3(76) addition Apr 17, 2006 All pages Model EMP-S4 addition...

Comments to this Manuals

Symbols: 0
Latest comments: