Built-In Card Slots; Card Slot Standards; Supported Memory Card; Supported Voltage - Epson STYLUS PHOTO 925 Service Manual

EPSON Stylus Photo 925

1.3 Built-in Card Slots

This section defines the specifications for the memory card types and card adapter
which can be used at standalone printing with this printer.

1.3.1 Card Slot Standards

V
CF Type II card slot x1 (Compatible with "CF+ and CompactFlash Specification
Revision 1.4")
V
SmartMedia card slot x1 (Compatible with "SmartMedia Standard 2000")
V
Memory Stick card slot x1 (Compatible with "Memory Stick Standard version
1.3")

1.3.2 Supported Memory Card

V
Compact Flash (which support I/O mode access)
V
Smart Media (Maximum capacity is 128MB)
V
Memory Stick

1.3.3 Supported Voltage

V
5 V
V
3.3 V/5 V
V
3.3 V
NOTE 1: Maximum current is 500 mA
2: SmartMedia 5 V is not supported
PRODUCT DESCRIPTION

1.3.4 Multiple Slots Operation

• Only one media can be accessed at a time for PC connection or for
C H E C K
direct printing.
P O I N T
• When cards have been inserted into multiple slots at the same time, a
slot to be accessed is selected according to the order of priority
• The LED beside the selected slot turns on. The LED blinks while the
media is being accessed.
V
For direct printing:
Only the image files in the valid slot are valid, and photo numbers are assigned to
the valid image files.
V
For PC connection (Windows):
Only one "removable disk" drive is displayed and only the media in the valid slot
can be accessed from the "removable disk".
V
For PC connection (Macintosh):
Only the media in the valid slot are mounted on the desktop.

1.3.5 Priority

The order of priority is defined as follows:
1. CompactFlash
2. SmartMedia
3. Memory Stick
1.3.6 Exclusive Access Control against External Storage
Device Connecting Port
The lowest priority is given to the device that is connected to the external storage
device port.
Built-in Card Slots
Revision A
16