Epson STYLUS PHOTO 925 Service Manual page 96

EPSON Stylus Photo 925
8. Align the cut portions found at the rear of the ASF Unit, and separate the ASF
Frame and ASF Hopper.
Figure 4-46. Separating the ASF Frame and ASF Hopper
9. Remove the Torsion Spring 32.7 set at the rear of the ASF Frame.
Figure 4-47. Removing the Torsion Spring 32.7
Disassembly and Assembly
ASF Hopper
ASF Frame
Torsion Spring 32.7
10. Remove the Pad holder (Paper return plate) from the ASF frame
Pad Holder
Figure 4-48. Removing the Pad Holder
Disassembly
Revision A
96