Epson STYLUS PHOTO 925 Service Manual page 141

EPSON Stylus Photo 925
Table 6-2.Lubrication Point (continued)
NO. Lubrication Type/Point
8 <Lubrication Point>
• Shaft for the combination gear 9.6, 24 on the ink system
frame
See Figure 6-9. "Lubrication point 8".
<Lubrication Type>
• G-26
<Lubrication Amount>
• φ2mm x 5mm
9 <Lubrication Point>
• Shaft for the combination gear 13.6, 33 located
in the left area of the printer
See Figure 6-10. "Lubrication point 9"
<Lubrication Type>
• G-26
<Lubrication Amount>
• 5mm
10 <Lubrication Point>
• Shaft for the combination gear 47, 19.2 located in the
left area of the printer
See Figure 6-11. "Lubrication point 10"
<Lubrication Type>
• G-26
<Lubrication Amount>
• φ1mm x 2mm
11 <Lubrication Point>
• Projection on the gear (spur gear 19.2/13.6) of the
cutter mechanism which comes in contact with the
frame
See Figure 6-12. "Lubrication point 11".
<Lubrication Type>
• G-26
<Lubrication Amount>
• φ1mm x 2mm
Maintenance
Remarks NO.
• Lubricate with a 12
dropping pipet.
• Lubricate with a 13
dropping pipet.
• Lubricate with a 14
dropping pipet.
• Lubricate with a
dropping pipet.
Overview
Table 6-2.Lubrication Point (continued)
Lubrication Type/Point
<Lubrication Point>
• Inside the bore of the right bushing for the paper
eject roller
See Figure 6-13. "Lubrication point 12".
<Lubrication Type>
• G-26
<Lubrication Amount>
• 2 turns
<Lubrication Point>
• Part of the PF Roller and Grounding Spring where
they come in contact with each other
See Figure 6-14. "Lubrication point 13".
<Lubrication Type>
• G-26
<Lubrication Amount>
• φ1mm x 10mm
<Lubrication Point>
• Inside the bore of the right bushing for the PF Roller
See Figure 6-15. "Lubrication point 14".
<Lubrication Type>
• G-26
<Lubrication Amount>
• φ3mm
Revision A
Remarks
• Apply with a brush.
• Lubricate with a
dropping pipet.
• Do not apply grease
to the paper path.
• Apply with a brush.
141