Table of Contents
Advertisement
If the internal accumulator is very discharged and you want to charge it by the external adaptor, first of all
be sure that ECR is turned off, then connect the external adapter for at least 15 minutes (ECR is off). The
internal accumulator is charging even the ECR is turned off.
Care of internal battery:
•
a complete battery charge takes 4 to 5 hours.
•
we suggest to charge a battery to 100 % and use it till cash register starts to signalize the battery char-
ge requirement. Repeat this process three times at least (it elongates an endurance of the battery).
•
we suggest to change the battery in case of the battery decrease, e. g. shorter work cycle of the
ECR after a battery charge.
SELF TESTS
Self tests of the Euro-2100TE cash register permit the checking of its functionality simply and quickly. Self
testing permits the automatic checking of the functionality of electronic circuits, display segments, keyboard
buttons, communication ports and the printer.
Self-test of the electronics and display
By executing this test, characters are gradually lightened on and off on the both displays.
Procedure for running the self-test of the electronics and display:
1) Switch ECR into the "P" mode:
2) Press
3) Press the
Display test end is announced by a beep. You can continue testing other parts of register.
Self-test of the printer
The self-test of the printer prints the identification data of the Euro-2100TE on the receipt and journal. It
prints the program version number, cash register configuration (number of departments, number of PLUs),
serial interface and FM enable/disable information and the complete character set in standard size with
related hexadecimal codes.
Procedure for running the self-test of the printer:
1) Switch ECR into the "P" mode:
2) Press
3) Press the
The printer test end is announced by a beep. You can continue in testing of other parts of register.
Self-test of the keyboard
The self-test of the keyboard displays the position, hexadecimal code and name after pressing a key. The
test checks functionality of the register keys.
Procedure for running self-test of keyboard:
1) Switch ECR into the "P" mode:
2) Press
3) Press the
4) Press the individual buttons one after another and check the values on the display.
on the keyboard.
(M
) button.
ULTIPLY
on the keyboard.
(M
) button.
ULTIPLY
on the keyboard.
(M
) button.
ULTIPLY
.
.
.
Helpful advice
93
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-2100TE and is the answer not in the manual?
Questions and answers