Table of Contents
Advertisement
Programming manual
4
3
5
8
6) Press
(S
ECR display shows current department number along with the label ("
play row; first display row contains current department name on the right.
7) Enter the department name. If you mistype, you can correct your mistakes by pressing
See the end of chapter for more detailed instructions on entering texts.
8) Press the
step 3). The programming of departments can be finished at any time by pressing
Departments correcting
1) Switch the ECR to the "P" mode by pressing
2) Enter the number of the department you want to adjust (1–30) and press
the selected department button to directly choose required department.
3) Continue re-programming desired values as shown in the section above.
4) You can print out all the programmed department values by pressing
the currently programmed department, press
5) Finish the corrections by pressing
Department values print out
Check the programmed department values by pressing the
ming mode. In the programming mode, press the direct button of a department or a department number
h
and then press the
currently programmed department, press the
SALE UNITS PROGRAMMING
Sale unit can be assigned to each PLU and represents the unit in which the PLU is sold. It is possible to
program eight sales units with up to three characters each. Figure 3.23 shows the default settings for sale
units; you can adjust these defaults to your needs.
Sale units programming procedure:
1) Switch the ECR to the "P" mode by pressing
2) Press the
the label ("SALE UNIT") in the second display row and programmed unit in the first row.
3) Enter the text for the current sale unit (up to three characters). You can correct mistypes by pressing
(C
) key. See the section on entering texts at the end of this chapter.
LEAR
38
Sale feature
HALO limit, maximum 8 (maximum number of
digits allowed)
) key to continue with programming the name for the current department. The
UBTOTAL
1 DPT NAME
(S
) to continue department programming for next department; proceed to
UBTOTAL
(DPT) button. Afterwards press the
(S
) key. The ECR display shows the current sale unit number along with
URCHARGE
SALE UNIT
2
DPT01
.
(EAN) key.
(T
) key.
OTAL
(EAN) key.
.
pcs
0 – sale forbidden,
1 – open price (manually entered price),
2 – fixed price (preprogrammed price),
3 – 1+2 (preprogrammed price or the possibi-
lity to enter a price manually)
1-8
NAME
") in the second dis-
h
(C
HECK
(C
) key in the department program-
HECK
(C
) button. To print the settings of
HECK
(C
).
LEAR
(T
) key.
OTAL
(DPT) key, or press
) key; to print out
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-2100TE and is the answer not in the manual?
Questions and answers