Extended Flags Programming; First Extended Flag; Second Extended Flag; Third Extended Flag - ELCOM Euro-2100TE User Manual

Programming manual

EXTENDED FLAGS PROGRAMMING

The extended flags are data which enable the user to set particular electronic journal functions, bar-codes
flags, etc.
Extended flags programming process:
1) Enter the programming mode "P" by pressing .
2) Press the   (P
3) After entering proper flag values, store them by pressing the  (S
The programming of the next flag follows. Continue until all necessary flags have been programmed.
4) Programmed flag settings may be printed by pressing the  (C
5) Finish the programming by pressing the  (T

First extended flag

If the fifth digit is 0, previous digit values are ignored.
Figure 3.11. First extended flag values
Digit Default setting
1 0
2 0
3 1
4 1
5 1
Note: In the case of electronic journal downloading to PC is good to set up 4th digit to zero.

Second extended flag

If the second digit is 0, the value 2 of first digit is ignored.
Figure 3.12. Second extended flag values
Digit Default setting
1 0
2 0
3 1
Note: To change third digit is possible only after „Z" PLU report.

Third extended flag

If the third digit is 0, the value of first two digits are ignored.
30
ERCENT DISCOUNT
Meaning
Unused
Immediate printing of verification receipt after the customer's receipt is
printed
Store text logos in the electronic journal
Print and clear electronic journal together with daily report
Store sale data in electronic journal
Meaning
Handing out of stock according to delivery note
Mandatory entry of customer number at the beginning
of a receipt
Update PLU sale data upon handing out from stock
(handed amount and total hand out value)
) button.
) button.
OTAL
).
UBTOTAL
) button.
HECK
Valid values
0 - no, 1 - yes
Valid values
0 - handing out is disabled,
1 - handing out is possible without
customer's checking,
2 - handing out is only possible with
customer's checking
0 - no, 1 - yes