Table of Contents
Advertisement
„P" The "P" program mode is used to program all values and functions of the cash register.
Switching into the "P" mode:
15-12-2005
P
„T" The training mode provides all functions of the "R" mode, but in this mode, the transactions are not
included in the daily or monthly (periodical) reports. The receipts printed in this mode are marked by the
text "Invalid document".
Switching into the "T" mode:
15-12-2005
T
„STANDBY" When the cash register is not operated for certain time limit (see chap. System flags program-
ming) and it is supplied from internal power supply, it will switch into the "Standby" mode. A cash register in
the "Standby" mode has a low consumption of energy. The notification "Standby" appears on the display.
STANDBY
Exit the "STANDBY" mode by pressing the
external power supply then stand by mode is not called.
PAPER RIBBONS INSTALATION
The Euro-2100TE cash register uses thermal paper ribbons 57 mm wide. The paper ribbon is designed for
the printing of customer receipts and for the printing of the control ribbon (journal) also.
Figure 2.7 - Paper ribbons installation procedure for Euro-2100TE:
�
�
�
11:07:39
11:07:39
�
(M
) button. In case the cash-register is supplied from
ODE
�
Cash register characteristics
�
21
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-2100TE and is the answer not in the manual?
Questions and answers