Quick Plu Price Programming; Quick Plu Stock Programming; Correction Of Programmed Plus - ELCOM Euro-2100TE User Manual

Programming manual
1) Enter / Exit
2) Emulation for PS/2
3) STX prefix
4) ETX sufix
5) Enter/Exit

Quick PLU price programming

If you need to change only the prices of several PLUs, you can easily do it by the following procedure:
1) Switch the ECR to the "P" mode by pressing
2) Enter the PLU number and press the
start form PLU no. 1. The PLU number and the label ("
current PLU price is displayed in the first row.
3) Enter the new price (maximum eight digits including decimals).

4) Press (S

5) Press (T

Quick PLU stock programming

The cash register also records stock information for each PLU. The PLU stock information can be changed
to another value directly, or you can alter stock by operations in the registration mode.
1) Switch the ECR to the "P" mode by pressing
2) Enter the PLU number and press the
start from PLU no. 1. The display shows current PLU number and label "
display row and the current stock for that PLU in the first row.
3) Enter stock value (up to nine digits, three decimal places including) and press:

• (S
UBTOTAL

• (S

• (D
Maximum stock value is 999 999.999. If you enter integer amount, enter the number and just

press . After pressing any of the above three keys, the ECR will continue with programming of
the stock for the next PLU.

4) Press (T

Correction of programmed PLUs

1) Switch the ECR to the "P" mode by pressing
42
1 PLU PRICE
) key to continue in the price programming of the next PLU; proceed to step 3).
UBTOTAL
) key to finish the quick PLU price programming.
OTAL
1 PLU STOCK
) key to apply the entered number as the new stock value,
) key to add the entered number to the current stock or
URCHARGE
) key to subtract the entered number from the current stock.
ISCOUNT
) to finish the quick PLU stock programming.
OTAL

.

(P ) button. If you don't enter any number, the ECR will
RICE
PRICE
0.00

.

(S ) key. If you didn't enter any number, the ECR will
CALES
0.000

.
") appear in the second display row,
STOCK
" in the second