Registration Using Bar-Codes; Duplicate Bar-Codes; Weight Entry By Electronic Scales - ELCOM Euro-2100TE User Manual

Registration using bar-codes

• registration using a bar-code scanner
A bar-code scanner can be connected to the cash register. Information is then registered simply by scan-
ning the bar-code on the article's packaging. If the bar-code scanner is to operate correctly, it has to be
properly configured and the ECR has to have its relevant flags set to proper values, more specifically the
fifth system flag (see PLU bar-codes programming section in the previous chapter).
Example: Customer buys three pieces of butter that have a bar codes on its packaging.
Step
1.
2.
• registration by a bar-code entered via the keyboard
In the case of bar-code scanner failure or if a bar-code is damaged, it is possible to enter the bar-code via
the keyboard.
Example 1: Registration of butter with the bar-code 8 586001 760096.
Step
1.
2.
3.
Example 2: Registration of five butters with the bar-code 8 586001 760096.
Step
1.
2.
3.
4.

Duplicate bar-codes.

It is possible to program same bar-code for more PLUs. You can register using such a bar-codes as follows:
If you enter bar-code which belongs to more PLUs ECR will go to selective mode. This mode is indicated
with „Select" label in left down part of the display. You can choose the right bar-code with  (S
 (D ) keys and confirm it with  (E
RAWER

Weight entry by electronic scales

The Euro-2100TE is able to read the weight of an article directly from connected electronic scales. Com-
munication between the cash register and the scales is possible only in "R" and "T" mode. The electronic
scales are connected to SCAN./SCALE connector of the cash register.
Press the  (S ) button to communicate with the scales. You can change the weight of the article (add
CALES
or take the goods from the scales) until any key is pressed on the ECR keyboard. After the weight is read
by the cash register, enter the PLU number and press the  (P
unstable, it is not possible to continue the sale.
In the case that electronic scale and scanner are connected together to one port and we want to register
weight of a PLU article using scanner it is need to be pressed  (M
scanned.
Press

using a bar-code scanner
Press



Press




AN
...

...

) key.
Operation in registration mode
Butter
3*34.90 =104.70
Butter
1*12.40
Butter
5*12.40
) button. If the weight on the scales is
LU
) key before bar code of PLU is
ULTIPLY
A
A
=12.40
A
=62.00
) or
CALES
59