Table of Contents
Advertisement
Reports
How to erase PC sale data
The contents of the electronic journal can be erased if one follows these procedures:
Conditions in „Z" mode: set second digit of third extended flag to 1. Press 5x (D
). This commen-
RAWER
ces the clearing of PC sale data in electronic journal without printing it to the paper tape (if the correspon-
ding electronic journal flag is set).
If you press (D
) and the corresponding flag for PC data clearing from ECR is set, then the ECR will
RAWER
both print out the PC sale data and clear them from the electronic journal memory. If said flag is set to 0,
then you'll be unable to clear the PC sale data form the ECR.
To avoid accidental clearing of the electronic journal, you are advised to authorise only a single cashier for
„P" and „Z" modes and his/her login should be password protected. The password should be changed on
a regular basis.
The PC sale data can be also erased using the PC-ECR communication. There is no special protection
against clearing the electronic journal via communications. The PC sale data are stored in the electronic
journal memory only if the third digit of third extended flag is set to 1.
82
Advertisement
Table of Contents
Need help?
Do you have a question about the Euro-2100TE and is the answer not in the manual?