Table of Contents
Advertisement
CDM-710G High-Speed Satellite Modem
SNMP Interface
8.5
Common Private MIB
The CDM-710G SNMP agent also implements private MIBs. The CDM-710G Common MIB
holds all unit parameters not associated with Modulator, Demodulator, FEC, or Interface boards.
For detailed OID information please refer to the actual MIB file.
System Information Group
Remote Serial Group
Remote Ethernet Group
Ethernet SNMP Group
Interface TX Group
Interface RX Group
Config Interface Group
Monitor Group
Save/Load Group
Utilities Group
Firmware Group
Modulator Private MIB
Provides hardware configuration information as well as serial and
model numbers
Provides parameters to the legacy serial interface parameters
Provides parameters of the Ethernet interface
Provides parameters necessary to configure the SNMP interface
Provides parameters that control the modulator options
Provides parameters that control the demodulator options
Provides parameters for selection of the modems frequency
response
Provides access to Alarm/Fault/Events log
Provides control of the unit configuration Store/Load capabilities
Provides access to the units Real-Time clock, Internal Reference
Adjustment, Circuit ID, and Front Panel Brightness Control
Provides Revision Numbers, and Release Dates for all firmware
within the unit
Provides access to all modulator specific functions such as
redundancy, GigE Interface, HSSI Interface, and G.703 Interface
8–3
Revision 1
MN-CDM710G
Advertisement
Table of Contents
