(Config:) Intfc2 Gigabit Ethernet Stats - Comtech EF Data CDM-710G Installation And Operation Manual

CDM-710G High-Speed Satellite Modem
Front Panel Operation
•
Second, this is the IP address that will be used in the event that new firmware is
provided by CEFD for the CDI-70 Gigabit Ethernet interface.
To edit, use the
value of the digit. Press
(CONFIG:) Intfc2 Gigabit Ethernet
Intfc1 Statistics:
View Clear
Select View or Clear using the
If Intfc1 Statistics:
Intfc1 Statistics:
FPGA LAN WAN MNG ALL
Select FPGA, LAN, WAN, MNG, or ALL using the
available statistics for the Gigabit Ethernet Interface, as depicted in these example screen shots,
are shown in Table 6-3 – examples of these read only displays are as follows:
If Intfc1 Statistics:
FPGA Link Errors
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics:
LAN Good Octets(Out)
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics:
WAN Good Octets(Out)
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics:
MNG Good Octets(In)
00000000000000000000 (▲ ▼ E)
If Intfc1 Statistics:
FPGA Link Errors
00000000000000000000 (▲ ▼ E)
arrow keys to select the digit, then use the
when done.
ENTER
( E)
arrow keys, then press
View is selected:
FPGA is selected:
LAN is selected:
WAN is selected:
MNG is selected:
ALL is selected:
6–32
arrow keys to change the
Stats
.
ENTER
arrow keys, then press
Revision 1
MN-CDM710G
. The
ENTER