Comtech EF Data CDM-710G Installation And Operation Manual page 232

CDM-710G High-Speed Satellite Modem
Remote Control
Command Arguments for
Parameter (Instruction Command or
Type Code and Response to
Qualifier)
Rx Signal Level N/A 3 bytes
Rx Demod RSW= 3 bytes
Acquisition
Sweep Width
Gigabit Learning SLM 2 bytes
Mode
Gigabit Auto SCX 2 bytes
Autocrossover
Serial Number N/A 9 bytes
Software N/A 5 bytes
Revision
Real-time Clock TIM= 6 bytes
Time
Temperature N/A 3 bytes
Description of Arguments
Query
Query Only.
Unit returns the value of the Rx signal level, in dBm, between +3.0 and –
99.0 dBm, where;
xxx is the Rx signal level.
Examples:
RSL=+03
RSL=-41
Command or Query.
Rx ± acquisition sweep range of demodulator, in kHz, ranging from ± 1 to ±
100 kHz.
Example: RSW=009 (selects ± 9 kHz)
Command or Query.
s=Slot 2 Only
a=1 GBEI Learning Enabled.
a=0 GBEI Learning Disabled
Command or Query.
s=Slot 2 Only
a=1 GBEI Cable Auto Crossover Enabled.
a=0 GBEI Cable Auto Crossover Disabled
Query Only.
Used to query the unit 9-digit serial number. Unit returns its S/N in the form
xxxxxxxxx.
Example: SNO=176500143
Query Only.
Unit returns the value of the internal software revision installed in the unit,
in the form: Boot:X.X.X Bulk1:Y.Y.Y Bulk2: Z.Z.Z
Example: SWR=Boot:1.0.3 Bulk1:1.0.1 Bulk2:1.0.0
Command or Query.
A time in the form hhmmss, indicating the time from midnight, where:
hh = hours (00 to 23)
mm = minutes (00 to 59)
ss = seconds (00 to 59)
Example: TIM=231259 (23 hours:12 minutes:59 seconds)
Query Only.
Unit returns the value of the internal temperature, in the form of sxxx
(degrees C). Where s is the sign and and xxx is the number of degrees.
Example: TMP=+026
A–42
Query
Response to (Instruction
Response to Query
Command Code and
Qualifier)
RSL? RSL? RSL=xxx
RSL*
RSL#
RSW= RSW? RSW=xxx
RSW? (see description of
arguments)
RSW*
RSW#
SLM= SLM?s SLM=a
SLM#
SLM?
SLM*
SCX= SCX?s SCX=a
SCX#
SCX?
SCX*
SNO? SNO? SNO=xxxxxxxxx
SNO*
SNO#
SWR? SWR? SWR=Boot:X.X.X
SWR* Bulk1:Y.Y.Y Bulk2:Z.Z.Z
SWR#
TIM= TIM? TIM=hhmmss
TIM?
TIM*
TIM#
TMP? TMP? TMP=sxxx
TMP*
TMP#
Revision 1
MN-CDM710G