Comtech EF Data CDM-710G Installation And Operation Manual page 86

CDM-710G High-Speed Satellite Modem
Front Panel Operation
If Ethernet CONFIG:
M&C Port MAC Address:
00-06-B0-00-56-33
This is a 'status only' display. Press
Note: The preceding address is representative of a typical MAC address.
If Ethernet CONFIG:
SNMP:
Community Traps
This is a 'status only' message. Submenus enable setting of the destination IP address for SNMP traps.
Press or
ENTER
If SNMP Community is selected:
SNMP Community:
Read
If Community
Read Community:
public
If SNMP Traps is selected:
SNMP Trap IP Address:
IP1 IP2
Select IP1, IP2, or Version using the
If SNMP Trap IP Address:
Trap ID #X:
000.000.000.000
To edit the SNMP Trip IP#1 or IP#2 Address, use the
edited, then use the
If SNMP Trap IP Address:
Trap Version:
SNMPv1 SNMPv2
Select SNMPv1 or SNMPv2 using the
MAC is selected:
ENTER
SNMP is selected:
(LRE)
to return to the previous menu.
CLEAR
(
Read is selected:
(
Version
IP1 or IP2 is selected:
(
arrow keys to change the value of the digit. Press
Version is selected:
( E )
or to return to the previous menu.
CLEAR
E )
E )
arrow keys, then press
E )
arrow keys to select the digit to be
arrow keys, then press
6–10
Revision 1
MN-CDM710G
.
ENTER
when done.
ENTER
.
ENTER