Setting The Operating Pressure - DURKOPP ADLER H868 Operating Manual

66

6.14.2 Setting the operating pressure

ATTENTION
Machine damage possible due to incorrect pressure.
An incorrect pressure can cause damage to the machine.
The operating pressure for the pneumatic unit is 6 bar.
Make sure that the operating pressure is set correctly before
putting the machine into operation.
Figure 47: Setting the operating pressure
1. Pull the turning handle (1) up.
2. Set the operating pressure in such a way that the pressure
indicator (2) indicates 6 bar:
To increase the pressure: Turn the turning handle (1) clockwise.
To reduce the pressure: Turn the turning handle (1)
counterclockwise.
3. Push the turning handle (1) down.
(1) - Rotary handle
(2) - Pressure indicator
1
6
4
8
2
10
2
0
Operating manual H868 Version 00.0 - 07/2013
Set-up