Set-up
4
3
Operating manual H868 Version 00.0 - 07/2013
Figure 44: Fitting the sewing lamp transformer
1. Screw the sewing lamp transformer (1) in place at the pre-
drilled holes (2) under the
table plate.
2. Fasten the connecting cable under the table plate using cable
ties.
3. Establish the plug connection to the supply line for the sewing
lamp.
Figure 45: Connecting the sewing lamp transformer to the control
(1) - X3 connection
(2) - 24V/X5 connection
1. Loosen the screw holder (4) for the control far enough to allow
the control to be removed..
(1) - Sewing lamp transformer
1
(2) - Pre-drilled holes
2
(3) - Adapter cover screws
(4) - Screw holder
1
2
63