Table of Contents
Advertisement
Safety instructions
Feed
Set-up
Operator's
obligations
Operating manual H868 Version 00.0 - 07/2013
3 Safety instructions
This section contains basic instructions for your safety. Read the
instructions carefully before setting up, programming, maintaining,
or operating the machine. Make sure to follow the information
included in the safety instructions. Failure to do this can result in
serious injury and damage to the machine.
3.1 Basic safety instructions
The machine may only be used as described in this manual.
The operating manual must be available at the machine's location
at all times.
Work on live components and equipment is prohibited. Exceptions
are defined in the specifications in DIN VDE 0105.
For the following work, the machine must be disconnected from
the power supply using the main switch or by disconnecting the
power plug:
Replacing the needle or other sewing tools
Leaving the workplace
Performing maintenance work and repairs
Incorrect or faulty spare parts can impair safety
and damage the machine. Therefore only use original spare parts
from the manufacturer.
Use a sturdy lifting carriage or forklift for transporting the machine.
Raise the machine max. 20 mm and secure it against slipping off.
The connecting cable must have a power plug approved in the
specific country. The power plug may only be connected to the
power cable by a qualified specialist.
Observe the country specific safety and accident prevention
regulations and the legal regulations concerning industrial safety
and the protection of the environment.
All warnings and safety signs on the machine must always be in
legible condition and may not be removed. Missing or damaged
labels must be replaced immediately.
11
Advertisement
Table of Contents
