Checking The Oil Level - DURKOPP ADLER H868 Operating Manual

Table of Contents

Advertisement

42
Cleaning procedure:
• Switch off the power supply at the main switch.
• Remove any sewing dust and thread remains using a
compressed-air pistol or a brush.
WARNING
Risk of injury due to flying particles.
Flying dirt particles can get in the eyes, causing
injury.
Hold the compressed-air pistol in such a way that
no particles fly near persons.
Take care that no particles fly into the oil pan.
ATTENTION
Possible damage to the paintwork from solvent-
based cleaners.
Solvent-based cleaners damage the paintwork of
the machine.
Use only solvent-free substances for cleaning the
machine.

5.15.2 Checking the oil level

WARNING
Skin injuries due to contact with oil
Oil can cause a rash if it comes into contact with
the skin.
Avoid any skin contact with the oil.
If oil gets on your skin, wash the affected skin
ATTENTION
Machine damage possible due to incorrect oil level.
Too little or too much oil can cause damage to the machine.
Check the oil level on a daily basis and top up oil so that the
oil level is always between the minimum and maximum
markings.
Operating manual H868 Version 00.0 - 07/2013
Operation

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-type h868-190361M-type h868-290361

Table of Contents