Table of Contents
Advertisement
Set-up
7
6
5
Operating manual H868 Version 00.0 - 07/2013
Figure 33: Completing the table plate
(1) - Thread stand
(2) - Hole in the table plate
(3) - Corner projections
(4) - Oil pan
1. Screw the drawer (5) with the left-hand bracket to the
underside of the table plate.
2. Screw the oil pan (4) in place under the recess for the machine.
3. Screw the cable duct (7) to the underside of the table plate.
4. Insert the thread stand (1) into the hole.
5. Fasten the thread stand (1) with nut and washer.
(5) - Drawer
(6) - Recesses for the rubber
mounts of the hinge
(7) - Cable duct
1
2
3
4
51
Advertisement
Table of Contents
