Sewing Foot Stroke - DURKOPP ADLER H868 Operating Manual

32
To reduce the sewing foot pressure:
• Turn the adjusting wheel (1) counterclockwise.
ATTENTION
Damage to the material possible if the sewing
foot pressure setting is incorrect.
If the sewing foot pressure is too high, the material
could tear.
If the sewing foot pressure is too weak, the material
could slip.
Adjust the sewing foot pressure in such a way that
the material to be sewn slides smoothly over the
base without slipping.

5.11 Sewing foot stroke

The two adjusting wheels in the middle of the machine arm
determine how high the sewing feet are raised during sewing. The
height can be adjusted continuously on a scale from 1 to 9 by
turning the wheels. With 1 the sewing foot is raised the least and
with 9 it is raised the highest.
Figure 19: Adjusting wheels for the sewing foot stroke
1
4
5
(1) - Adjusting wheel for the normal
sewing foot stroke
To increase the sewing foot stroke:
• Turn the adjusting wheel clockwise.
To reduce the sewing foot stroke:
• Turn the adjusting wheel counterclockwise.
The left adjusting wheel (1) determines the normal sewing foot
stroke.
6 6
4
5
(2) - Adjusting wheel for the
Operating manual H868 Version 00.0 - 07/2013
Operation
2
elevated sewing foot stroke