Set-up
Operating manual H868 Version 00.0 - 07/2013
6.13 Electrical connection
DANGER
Danger to life due to electric shock.
The machine may only be connected by trained
electrical specialists.
Disconnect the power plug before carrying out
work on the electrical equipment. Make sure the
power plug cannot be unintentionally reinserted.
The voltage on the type plate of the sewing drive
must correspond to the mains voltage.
6.13.1 Fitting the sewing lamp
The sewing lamp is an additional component that is not part of the
standard delivery package.
DANGER
Danger to life due to electric shock.
When you disconnect the sewing machine from the
power supply at the main switch, the supply
voltage for the sewing lamp remains active.
Disconnect the power plug before connecting the
sewing lamp. Make sure the power plug cannot be
unintentionally reinserted.
• Unscrew the valve cover and upper machine cover
(
Section 6.12 Fitting the control panel).
The upper machine cover has pre-drilled holes for attaching the
sewing lamp.
61