Symbols And Characters Used; Other Documents - DURKOPP ADLER H868 Operating Manual

Safety
Location
information
4

1.3 Symbols and characters used

Different information is depicted or highlighted in this operating
manual by the following characters for easier and quicker
understanding:
Symbol/character
•
1.
2.

Important warnings for the user of the sewing machine are
specifically marked. Because safety constitutes an area of major
importance, hazard symbols, levels of risk, and their signal words
are described separately in  Section 3 Safety instructions.
Information on where something is positioned using the terms
"right" or "left" must always be regarded from the operator's
point of view if the figure gives no other obvious indication for
determining the location.

1.4 Other documents

The device contains built-in components from other manufactur-
ers. The respective manufacturers have carried out hazard as-
sessments for these purchased parts and confirmed compliance
of the design with the applicable European and national regula-
tions. The intended use of the built-in components is described in
the corresponding manuals of the manufacturers.
Lists are identified by bullet points.
Instructions are numbered and have to
be performed in the specified order.
References to further information in this
operating manual or other documents
are identified by this symbol.
Operating manual H868 Version 00.0 - 07/2013
About this manual
Meaning