Table of Contents
Advertisement
Operation
16
15
14
13
Operating manual H868 Version 00.0 - 07/2013
Figure 6: Threading procedure for needle thread – part 2
9. Guide the thread under the hook (16).
10. Insert the thread from bottom to top through the hole on the
thread regulator (11).
11. Insert the thread from the right to the left through the thread
lever (10).
12. Insert the thread through the upper thread guide (15).
13. Insert the thread through a hole in the lower thread guide (14).
14. Insert the thread through the thread guide on the needle
bar (13).
15. Insert the thread through the needle eye (12) in such a way
that the loose thread end faces the hook.
16. Pull the thread through the needle eye (12) until the loose
thread end has a length of 4 cm in the highest position at the
thread lever (10).
10
(10) - Thread lever
(11) - Thread regulator
(12) - Needle eye
(13) - Thread guide on the needle bar
(14) - Lower thread guide
(15) - Upper thread guide
11
(16) - Hook
12
21
Advertisement
Table of Contents
