Table of Contents
Advertisement
Covers
60
Figure 42: Fitting the control panel – Part 2
6
(6) - Connecting cable
4. Install the connecting cable (6) in the machine arm.
5. Guide the cable through the hole in the table plate.
6. Insert the plug of the connecting cable in the socket of the
control.
If you have an additional sewing lamp to install as
additional equipment:
• Leave the cover open until the sewing lamp has been installed
and the sewing lamp cable has been laid.
7. Screw the valve cover (4) and upper machine cover (5) back
into place.
Operating manual H868 Version 00.0 - 07/2013
Set-up
Advertisement
Table of Contents
