Table of Contents
Advertisement
Making your
own table plate
50
3. Screw the cross strut (6) onto the foot struts (5).
4. Insert the inner bars (2) in such a way that the longer end of
the head section (1) is above the longer end of the foot
struts (5).
5. Screw the inner bars (2) tight in such a way that both head
sections (1) have the same height.
6.4 Fitting the pedal
Figure 32: Fitting the pedal
1. Fit the pedal (1) on the cross strut (2) and align it in such a
way that the middle of the pedal is under the needle.
2. Screw the pedal (1) firmly onto the cross strut (2).
6.5 Completing the table plate
The table plate belongs to the optional delivery scope. If you want
to make your own table plate, drawings with the dimensions are
available in the Appendix.
1
2
Operating manual H868 Version 00.0 - 07/2013
Set-up
(1) - Pedal
(2) - Cross strut
Advertisement
Table of Contents
