Sewing Test - DURKOPP ADLER H868 Operating Manual

Set-up
Operating manual H868 Version 00.0 - 07/2013

6.16 Sewing test

Carry out a sewing test before starting up the machine. Adjust the
machine to the requirements of the material to be sewn.
To do this, read the corresponding sections in the  Operating
manual.
WARNING
Risk of injury by the needle point and moving
parts
Switch off the sewing machine before replacing the
needle, insert the thread, insert the hook thread
reel, adjust the hook thread tension and the thread
regulator.
1. Insert the needle.
2. Thread in the needle thread.
3. Thread in the hook thread.
4. Wind on the hook thread.
5. Insert the hook thread reel.
6. Adjust the thread tension to the material to be sewn.
7. Adjust the thread regulator to the material to be sewn.
8. Adjust the sewing foot pressure to the material to be sewn.
9. Adjust the sewing foot stroke to the material to be sewn.
10. Adjust the stitch length.
11. Transfer the desired quick function from the keypad to the
additional switch.
12. Start the sewing test at low speed.
13. Increase the sewing speed continuously until the working
speed is reached.
69