DURKOPP ADLER H868 Operating Manual page 25

Operation
5
4
Operating manual H868 Version 00.0 - 07/2013
Figure 8: Thread guide on the unwinding bracket and machine arm
2
1
1. Fit the thread reel on the thread reel holder (1).
2. Insert the thread from the rear to the front through a hole in
the guide on the unwinding bracket (2).
Figure 9: Winding on the hook thread - part 1
4
5
(1) - 1st thread guide
(2) - Hook thread guide
(3) - Winder
1. Insert the thread from the rear to the front through the right
hole in the 1st thread guide (1).
2. Insert the thread in a wavelike manner through the 3 holes of
the 2nd thread guide (5): from top to bottom through the left
hole, from bottom to top through the hole in the middle and
finally from top to bottom through the right hole.
(1) - Thread stand
(2) - Guide on the unwinding bracket
6 6
4
5
(4) - Hook thread winding tension
(5) - 2nd thread guide
1
2
3
23