Stitch Length - DURKOPP ADLER H868 Operating Manual

34
ATTENTION
Machine damage possible if the adjusting
wheels are turned using brute force.
The machine is designed in such a way that the
sewing foot stroke at the right adjusting wheel
cannot be set lower than at the left adjusting wheel.
Do not attempt to use brute force to set a smaller
sewing foot stroke at the right adjusting wheel.
The machine automatically adapts the number of stitches to the
sewing foot stroke. If you increase the sewing foot stroke, the
number of stitches will be reduced.

5.12 Stitch length

The two adjusting wheels on the machine column determine the
stitch length. The stitch length can be adjusted continuously from
0 to 12 mm.
The adjusting mark (3) on the left on the wheel indicates the stitch
length selected.
Figure 21: Adjusting wheels for the stitch length
4
(
1) - Upper adjusting wheel for the
larger stitch length
(2) - Lower adjusting wheel for the
smaller stitch length
12
3
(3) - Adjusting marks for indicating
the stitch length selected
(4) - Keypad key for the stitch length
Operating manual H868 Version 00.0 - 07/2013
Operation
mm
1
mm
2