3
58
6.11.2 Fitting the mechanical knee lever
Figure 40: Fitting the mechanical knee lever
(1) - Transmission rod
(2) - Hole in the oil pan
1. Fold the machine upper section back.
2. Fit the transmission rod (1) in the oil pan.
3. Screw the knee lever (3) rods together.
4. Guide the rod (3) through the hole in the oil pan (2) and connect
it to the transmission rod (1).
(3) - Knee lever rod
Operating manual H868 Version 00.0 - 07/2013
Set-up
1
2