Fastening The Table Plate To The Frame - DURKOPP ADLER H868 Operating Manual

52
6. Screw the thread real holder and the unwinding bracket onto
the thread reel holder (1) in such a way that they are exactly
opposite each other.
7. Insert the plug (2) in the hole.
8. Insert the rubber mounts of the hinge in the recesses (6).
9. Insert the rubber corners in the corner protrusions (3) of the
recess for the machine.

6.6 Fastening the table plate to the frame

Figure 34: Fastening the table plate to the frame
(1) - Screw holes and screws
1. Place the table plate on the head sections of the inner bars.
2. Screw the table plate firmly in place at the 4 screw holes (1).
Operating manual H868 Version 00.0 - 07/2013
Set-up
1