Fitting The Control Panel - DURKOPP ADLER H868 Operating Manual

Set-up
4
5
Operating manual H868 Version 00.0 - 07/2013

6.12 Fitting the control panel

Figure 41: Fitting the control panel – Part 1
(1) - Control panel
(2) - Control panel bracket
(3) - Cable duct
1. Unscrew the valve cover (4) and upper machine cover (5).
2. Screw the control panel (1) firmly onto the control panel
bracket (2).
3. Install the connecting cable through the cable duct (3).
(4) - Valve cover
(5) - Upper machine cover
1
2
3
59