Fitting The Setpoint Device - DURKOPP ADLER H868 Operating Manual

54

6.8 Fitting the setpoint device

Figure 36: Fitting the setpoint device
(1) - Angle piece
(2) - Setpoint device
1. Screw the angle (1) under the table plate.
2. Screw the setpoint device (2) onto the angle piece (1).
3. Pull the pedal rod (3) to the correct length:
10° inclination with pedal (4) released.
4. Attach the pedal rod (3).
10°
(3) - Pedal rod
(4) - Pedal
Operating manual H868 Version 00.0 - 07/2013
Set-up
1
2
3
4