Printer Is Making Unusual Noises; Automatic 2-Sided Printing Problems; Date And Time Are Incorrect - Xerox WorkCentre 7500 Series User Manual

Printer is Making Unusual Noises

Probable Causes
One of the trays is not installed correctly.
There is an obstruction or debris inside the
printer.

Automatic 2-Sided Printing Problems

Probable Causes
Unsupported or incorrect media.
Incorrect setting.

Date and Time are Incorrect

The date and time are set automatically when the printer is connected to a network that has a Network
Time Protocol (NTP) server. NTP is used to synchronize the internal clocks of computers over a network
connection at system startup and every subsequent 24-hour period thereafter. This feature ensures that
the internal clock of the printer stays synchronized with the NTP server you specify.
Note: To access this feature at the control panel, log in as an administrator.
Probable Causes
The time zone, date, or time is set incorrectly.
Solutions
Open and close the tray from which you are printing.
Turn off the printer and remove the obstruction or debris. If you
cannot remove it, contact your Xerox
Solutions
Make sure that you are using the correct paper. For details, see
Supported Paper on page 38. Envelopes, labels, transparencies,
reloaded paper, and paper heavier than 220 g/m
for 2-sided printing.
In the print driver Properties,select 2-Sided Print on the
Paper/Output tab.
Solutions
1. At the printer control panel, press the Machine
Status button, then touch the Tools tab.
2. Touch Device Settings > General > Date & Time.
3. To set the time zone, touch Time Zone and touch the
arrows to adjust the time zone.
4. To set the date, touch Date, select a format and set
the date.
5. To set the time, touch Time and set the time. Select
Display 24 hour clock to use 24 hour format.
6. Touch Save.
WorkCentre 7500 Series Multifunction Printer
Troubleshooting
®
service representative.
2
cannot be used
User Guide
193