Xerox WorkCentre 7500 Series User Manual page 218

Troubleshooting
• Observe the paper tray fill line; never overfill the tray.
• Adjust the paper guides in all trays after inserting the media. A guide that is not properly adjusted
can cause poor print quality, misfeeds, skewed prints, and printer damage.
• After loading the trays, select the correct paper type and size on the control panel.
• When printing, select the correct type and size in the print driver.
• Store paper in a dry location.
®
• Use only Xerox paper and transparencies designed for the printer.
Avoid the following:
• Paper that is specially designed for ink-jet printers with polyester coating.
• Paper that is folded, wrinkled, or excessively curled.
• Fanning transparencies before loading in the tray.
• Loading more than one type, size, or weight of paper in a tray at the same time.
• Loading punched paper or paper with folded corners or staples in the document feeder.
• Overfilling the trays.
• Allowing the output tray to overfill.
• Allowing the output tray to fill with more than a few transparencies.
Refer to the control panel Paper and Media Information Pages for information on supported paper, or
go to www.xerox.com/paper.
218 WorkCentre 7500 Series Multifunction Printer
User Guide