Scanning To Your Home Directory - Xerox WorkCentre 7500 Series User Manual

Scanning

Scanning to Your Home Directory

The Scan to Home feature allows you to scan an image to your home directory.
Note: The system administrator must set up this feature before you can use it. For details, see the
System Administrator Guide at www.xerox.com/office/WC75xxdocs.
To scan an image to your home directory:
1. Load the original on the document glass or in the document feeder.
Press the Services Home button, then touch Workflow Scanning.
2.
3. Touch the Down arrow, then select Scan to Home Templates from the menu.
4. Select the template created by the system administrator from the list.
5. To change any of the scan settings, use the options at the bottom of the touch screen:
• Output Color
2-Sided Scanning
•
• Original Type
Scan Presets
•
For details, see Changing the Basic Scan Settings
For more options, touch the Advanced Settings tab. For details, see
6.
page 108.
7. Press the green Start button.
106 WorkCentre 7500 Series Multifunction Printer
User Guide
on page 107.
Selecting Advanced Settings on