Clearing Booklet Staple Jams In The Professional Finisher - Xerox WorkCentre 7500 Series User Manual

6. Grip the staple cartridge by the orange tabs and insert it into the staple cartridge unit until it clicks.
7. Close the finisher front door.

Clearing Booklet Staple Jams in the Professional Finisher

The stapler in the booklet maker uses two staple cartridges labeled R2 and R3. Booklet stapling requires
that both staple cartridges be free of jammed staples.
WARNING:
Do not perform this procedure while the printer is copying or printing.
1. Open the front door of the finisher.
2. While squeezing orange levers R2 and R3 together (1), pull the staple cartridge unit out of the
finisher until it stops (2).
Note: The staple cartridge unit does not detach from the finisher.
WorkCentre 7500 Series Multifunction Printer
Troubleshooting
227
User Guide