Resetting Supply Life Counters - Xerox WorkCentre 7500 Series User Manual

8. Place the new second bias transfer roll in the printer as shown. Press down until the transfer roller
clicks into place.
9. Remove the protective cover from the second bias transfer roll.
10. Close top left cover A.

Resetting Supply Life Counters

You must reset the supply life counters when you replace some supplies.
Note: To access this feature at the control panel, log in as an administrator.
1. Press the Log In/Out button, enter the system administrator login information, and then press
Enter. For details, see the System Administrator Guide.
On the control panel, press Machine Status.
2.
3. Touch the Tools tab, then touch Device Settings.
Touch General > Supply Counter Reset. Touch the scroll arrows if necessary.
4.
5. Touch the desired supply item, then touch Reset Counter.
In the confirmation screen, touch Reset.
6.
7. Touch Close.
8. Press the Log In/Out button, then touch Logout.
WorkCentre 7500 Series Multifunction Printer
Maintenance
175
User Guide