Xerox WorkCentre 7500 Series User Manual page 86

Copying
Erasing the Edges of Copies
You can erase content from the edges of your copies by specifying the amount to erase on the right, left,
top, and bottom edges.
To erase edges on copies:
Press the Services Home button, then touch Copy.
1.
2. Touch the Layout Adjustment tab, then touch Edge Erase.
3. On the Edge Erase screen, select one of the following:
All Edges erases all four edges by the same amount. Touch the All Edges arrows to specify the
•
amount to erase from the edges.
Individual Edges specifies different amounts for the edges. Touch Side 1, then touch the Left,
•
Right, Top, and Bottom arrows to specify the amount to erase from each edge. Touch Side 2,
then touch the Left, Right, Top, and Bottom arrows to specify the amount to erase from each
edge, or touch Mirror Side 1.
Note: You can use preset values that were previously saved by the system administrator. Touch
Presets in the lower left corner of the screen, and select a preset from the drop-down menu.
4. Touch Save.
Inverting the Image
You can invert your original, as a mirror image or as a negative image. You can use one or both of these
options.
To invert the image:
1. Press the Services Home button, then touch Copy.
Touch the Layout Adjustment tab, then touch Invert Image.
2.
3. On the Invert Image screen, select the desired options:
Mirror Image reflects each image left to right on the page. The default setting is Normal
•
Image.
Negative Image reverses the black and white values. The default setting is Positive Image.
•
Touch Save.
4.
86 WorkCentre 7500 Series Multifunction Printer
User Guide