Clearing Jams At Tray 5 (Bypass Tray) - Xerox WorkCentre 7500 Series User Manual

3. Remove the paper from the tray.
4. If the paper is torn, remove the tray completely and check inside the printer for torn pieces of paper.
5. Reload the tray with undamaged paper, then push the tray in until it stops. Paper Settings - Tray X
appears on the control panel.
6. Verify the size, type, and color of the paper. Change the selection for any incorrect setting.
On the printer touch screen, touch Confirm.
7.

Clearing Jams at Tray 5 (Bypass Tray)

1. Remove the jammed paper from the tray. Make sure the paper feed entrance where the tray
connects to the printer is clear.
WorkCentre 7500 Series Multifunction Printer
Troubleshooting
197
User Guide