Xerox WorkCentre 7500 Series User Manual page 183

3. Grip the staple cartridge by the orange tabs and remove the cartridge by pulling it firmly toward
you. Check inside the finisher for any loose staples and remove them.
4. Pinch both sides of the staple case (1) and remove the staple case from the cartridge (2).
5. Insert the front side of the new staple case into the staple cartridge (1), then push the rear side into
the cartridge (2).
6. Grip the staple cartridge by the orange tabs and insert it into the staple cartridge unit until it clicks.
7. Close the finisher front door.
WorkCentre 7500 Series Multifunction Printer
Maintenance
183
User Guide