Initialization - ELCOM Euro-200TE User Manual

Programming manual

INITIALIZATION

If the electronic cash register is being used for the first time, it's suggested to first initialize the electronic
cash register. At initialization, all information will be erased from the electronic cash register and the electro-
nic cash register will have factory default settings and data. Only the cumulative sum – GT, the order number
of the daily and monthly reports and the value of the first system flag – will be unaffected. Initialization can be
done only after a daily or monthly (periodic) report in Z mode and the saving of the electronic journal.
Initialization procedure:
1) 1) Start the cash register. By pressing
P

2) Press key
tom row will be the options for continuing with data erasing ( Y-ST ) or cancellation of initialization
( N-CL ).
Rensar minnet
3) To confirm initialization, press
4) After confirmation, on display will be the actual set PLU range and the interval in which the user can
choose the PLU limit number. By entering numbers from
of PLU depending on the hardware memory extension:
PLU antal:
Intrvl 1100-16000

5) To confirm the setting for the number of PLUs, press
with key
6) After entering the number of PLUs, rounded up to the hundred, the memory available for the journal
will be displayed.
PLU:16000 JRN:512kB
7) If the settings are correct, confirm initialization with the set number of PLUs and the memory left for
the journal by pressing the key
of PLUs setting.
8) After confirmation of initialization, the message "Memory clearing" will appear on the display, and
the same message will be printed on a receipt, after which the cash register will start initialization.
9) Enter the date in the format (DDMMRR) and the time as (HHMM).
10) After entering of the date and time, the cash register will print a message summarizing memory alloca-
tion Memory clearing.
28
15-05-2009
19:05:33
Memory clearing
. The words „
J-ST/N-CL

(TOTAL).
J-ST/N-CL

010106
ANGE DATUM

, then switch to P mode.
(SUBTOTAL). To cancel, press
16000

(SUBTOTAL) to continue or the key
" will appear on the display and in the bot-

.
 
to the user can set the number
(SUBTOTAL), or cancel the initialization

to go back to the number
0000
ANGE TID